PS150

C-SJ5-8

article #

2100

lift [m]

0-22

max. flow rate [m3/h]

5.0

max. efficiency [%]

45

solar operation

nominal voltage 12-24 V DC
open circuit voltage max. 50 V DC

solar generator [Wp]

65-450

battery operation

nominal voltage 12-24 V DC

 Controller PS150

• controlling of the pump system and monitoring of the operating states
• charge controller included
• mounted at surface (no submerged electronic parts)
• two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
• automatic reset 20 minutes after well probe turns pump off
• protected against reverse polarity, overload and high temperature
• speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
• solar operation: integrated MPPT (Maximum Power Point Tracking)
• battery operation: low voltage disconnect and restart after battery has recovered
• max. efficiency 88 % (motor + controller)
• enclosure: IP 54 (sealed, weatherproof)

Motor ECDRIVE 200 C

• brushless DC motor
• water filled
• dynamic slide bearings, material: carbon/ceramic
• wetted material: stainless steel (AISI 316), POM, rubber, cable drinking water approved

Pump end (PE)

• high life expectancy
• none-return valve
• dry running protection (optional)
• material: stainless steel (AISI 316), rubber